Quick Answer: What Kind Of Paint Do You Need For A Dresser?

Can you paint a dresser without sanding?

No, you do not.

But you do need to properly prep the surface first.

Wiping it down with a clean soapy rag is always advised, and you may want to use a deglosser.

I choose to use an oil-based paint instead which will adhere to a varnished surface and is a great way to prep for a final coat of paint..

How do you paint furniture like a pro?

How to Paint Furniture Like a ProUse the Right Tools. To avoid visible brush strokes in your paint job, you need to use the right tools. … Know What Not to Paint. … Lightly Sand Before You Begin. … Use Primer. … Water Down Your Paint. … Lightly Sand In Between Coats. … Finish with Polycrylic. … Put Furniture on Blocks.More items…•

What happens if you don’t sand before painting?

When You Can Skip Sanding, Deglossing and Priming If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting. Before painting though, do make sure the piece is clean.

Can I paint over old paint on wood?

Never attempt to paint an existing wood surface without preparing its surface. Applying a direct coat of paint over the old coating will not work and eventually will tend to peel, especially if it has a glossy finish. This painting technique needs to prepare the wooden surface first.

What kind of paint do you use for chest of drawers?

If you can find a latex enamel paint in the color you want, then I would go with that as enamel has a very durable finish and is perfect on kids, bathroom, and kitchen furniture where a lot of abuse and moisture can occur. When priming and painting, make sure to paint the inside edges where doors and drawers go.

Is it hard to paint a dresser?

Here’s the truth: as good as most furniture paint is, most of the brands will require you to paint two coats. … You might even need to do THREE coats, depending on your dark your dresser is. The darker the wood, the more coats you might need. If you’re just painting a basic coat, don’t worry about any special technique.

How much spray paint do I need to paint a dresser?

Do as many light, thin coats as you need to get the coverage you want. For this project I did about 3 coats and used about 3.5 cans. The dreaded spray paint crinkling!! Way too cold outside and it may have also had some dust on it from our super clean garage.

How can I paint without brush marks?

How To Paint Without Leaving Brush Strokes (5 Step Guide)Use A Quality Brush.Get The Right Amount Of Paint On The Brush.Don’t Apply Too Much Pressure To The Brush.Leave End Strokes In The Same Direction.Use A Roller Or Spray Gun Instead.

Can you just paint over a dresser?

If you’re painting over painted furniture, make sure to sand down any drips from the previous paint job. I recommend lightly sanding the entire piece of furniture, as it will help the new paint stick. Use sandpaper between a 120 and at least 220 grit.

Can you use wall paint on furniture?

Time To Paint. If you have leftover latex paint, you can use that wall paint on furniture too. Latex or water-based acrylic paints work better than oil paints for refinishing furniture. It sets faster, is durable, and it’s easy to remove if you want to refinish your furniture again later on.

Can I spray paint a dresser?

As it turns out, not only can you spray paint wood without sanding – you can also spray paint pressed wood/particle board (which some parts of this desk were) and even that papery cardboard panel on the back. All of it you guys. Just spray paint ALL of it. Then let it dry and do it again.

whiteShades of white or off-white continue to be chosen as best sellers, designer favorites and recommended colors. Mixing other colors with white can create custom hues, and white is widely used in two-tone effects. Its overall versatility and popularity arguably make white the most popular color for painted furniture.

What do I need to repaint a dresser?

Here’s what you’ll need to transform a dresser of your own:Wood filler.Paintbrush and roller.Putty knife.Screwdriver.Craft knife.Low-grade sandpaper.Spray-paint primer.White water-based latex interior paint.More items…•

What kind of paint do you use on a dresser without sanding?

USE A MINERAL PAINT Mineral paint is very similar to chalk style paints in that no prep or prime is required. It sticks to pretty much anything. As an added bonus, brands like Fusion are so durable, it’s waterproof, stain proof and doesn’t even require a topcoat.

How do you paint a dresser that’s not real wood?

The 2 Best Ways to Paint Laminate Furniture ~ Method #1Clean the Surface. This dresser was dusty so all that was needed to clean it was a soft cloth dampened with warm water. … Lightly Sand the Entire Piece. Yes SAND! … Prime. I used B.I.N shellac based primer. … Paint. … Protect with a Sealer/Topcoat.

What is the best paint for upcycling furniture?

The best furniture paints you can buyRust-Oleum Chalky Finish Furniture Paint. … Ronseal Satin Cupboard Paint. … Rust-Oleum Gloss Furniture Paint. … Ronseal Chalky Furniture Paint. … Johnstone’s Revive Chalky Furniture Paint. … Hemway Chalk Matt Finish Wall and Furniture Paint. … Frenchic Furniture Paint.More items…